Different Types Of Marine Signal Lights

YSmarines is one of the leading and trustworthy marine signal light suppliers, finest quality and the most reasonable prices promised.

CXH13 Type Flag Pole Lights for Marine

The type of flag pole lights is widely used for the identification of bow signals and the navigation of ships. The shell is made of good quality cast brass. The structure is firm with fine seal performance and it can prevent seawater immersing effectively. They are equipped with a special ship signal bulb.

Features

1. AC 220V, power 25W. With E27 lamp holder.

2. Suitable for cables with outside diameter of 12mm.

3. The shell is made of good quality cast brass.

4. The structure is firm, fine seal performance, and it can prevent from the sea water immersing effectively.

CXH-12PL Type LED Marine Navigation Lights

The LED marine navigation lights are used as lamp signal liaise for the night navigation. They adopt the special LED light source which is according to the ship rule and regulation, which are more energy-saving and long service life with up to 50,000 hours. The low power consumption of LED navigation lights means your batteries will drain much more slowly than with traditional lights. The shell is made of high-strength engineering plastic PA+GF. They have a whole seal structure to resist water intrusion, corrosion, vibration, and UV radiation.

Features

1. Applied to the ships with the length 50m or above 50m as lamp signal liaison.

2. AC100~240V 50HZ/60HZ DC24V, power 6W.

3. Suitable for cables with an outside diameter of 10mm~12mm.

4. Adopt the special LED light source, compact structure, super waterproof.

Authentications

1. Approved by CCS (CHINA CLASSIFICATION SOCIETY) and ZY of China Fishery Inspection.

2. Approved by MED/EC.

3. The patent no is ZL 201630058159.9.

CXH14 Type Flashing Signal Light with signal LED light source

The flashing signal light is applied to the ships for flicker signal usage. The shell is made of high-strength engineering plastic PA+GF, the lampshade adopts injection of PC, lens hood adopts good quality stainless steel. It has the whole seal structure with waterproof under the bad environment. It adopts the signal LED light source of ship rule and regulation, which is more energy-saving and long life-span. It can work normally under the temperature -30℃~50℃.

Features

1.Applied to the ships for flicker signal usage.

2.AC110~240V 50HZ/60HZ , DC24V , power 8W. White, Red, Green colors.

3.Suitable for cables with outside diameter of 9mm.

4.The whole seal structure, waterproof.

5.The signal LED light source, it is more energy saving and long life-span.

Standards

1. Conform to THE INTERNATIONAL REGULATIONS FOR PREVENTING COLLISION AT SEA,1972 and GRADE ENTRY NORMS FOR STEEL SHIPS.

2. Conform to the international standard IEC.

3. Conform to the standard of marine electric signal light’s technical condition GB/T 3028-1995.