vacuum fume extractor supplier maintenance methods and operation methods

vacuum fume extractor supplier is equipped with an electromagnetic pulse valve to open the pulse valve, so that compressed air radiates from each hole of the blow pipe to the corresponding venturi pipe, and the dust on the filter bag is cleaned to keep the bag smooth and continuous. The cleaned material is sent out by a hanger under the bag. As the bag filter begins to use the new filter bag, it relies on inertial collisions between dust particles in the fiber and fabric holes. It is intercepted directly by static and chaotic, brown dust collecting dust. When a layer of dust is formed on the fabric, the dust is collected by the shielding effect of the dust layer under the dust removal rate of existing types of exhaust fume cleaning precipitators and vacuum fume extractor suppliers. It can capture fine dust particles with a particle size of less than 1, which is higher than the rate of electrostatic precipitators and high pressure venturi precipitators. Dust properties. The rate of vacuum fume extractor supplier is directly related to the size, weight, shape, electrostatic action and dust concentration of dust particles.

What is the maintenance method of vacuum fume extractor supplier? The following, for you to talk about in detail:

I. vacuum fume extractor supplier's motor can work, whether it is normal;

2. Whether the external sealing work of vacuum fume extractor supplier is completely closed and whether the clamp is not;

Three, through the vibration motor of vacuum fume extractor supplier will be attached to the dust on the filter element vibration down, do not wipe with a rag, so easy to get into the water, cause no trouble.

Four, often maintain vacuum fume extractor supplier, the time is set at about half a year, which is also important for the filter element, because it is the core part of the filter. The filter element should also be replaced and maintained regularly.

Newly installed vacuum fume extractor supplier has a run-in period, after which the equipment can achieve a good dust removal effect, so it is important to operate and debug during the run-in period. vacuum fume extractor supplier commissioning and operation during the readjustment period:

First, accessories during the beginning of operation, often occur abnormal temperature, pressure, moisture and other problems, will cause damage to the new vacuum fume extractor supplier device.

Two, the installation of dust filter bag, after use, whether there is a bag, loose mouth, wear and other situations.

Three, after the operation can be determined by visual inspection of the chimney discharge. Pay attention to whether there is condensation in the bag room and whether the ash removal system is. Prevent plugging and erosion, ash accumulation will affect the production of vacuum fume extractor supplier. The adjustment of cleaning cycle and cleaning time is an important factor for the performance and operation of vacuum fume extractor supplier.

Four, the treatment of air volume and each test point pressure and temperature is consistent with the design. Fan rotation direction speed bearing vibration and temperature. Whether vacuum fume extractor supplier operates normally directly affects whether it can be used on the assembly line. Otherwise, it is likely that vacuum fume extractor supplier will lose its effectiveness very slowly.

Five, debugging vacuum fume extractor supplier of the run-in period to be careful and careful. The rapid change of the gas temperature of the dust removal accessories will cause the deformation of the fan shaft, resulting in an unbalanced state and vibration in operation. Once the operation is stopped, the temperature will drop and the vibration will occur when the operation is restarted. If vacuum fume extractor supplier cleans ash for too long, it will cause filter bag leakage and damage.

vacuum fume extractor supplier The performance of the filter cloth has great influence on the dust removal rate and property of the filter cloth. The filter material should be able to prevent dust from passing through, the weft and filling holes should be small, and the warp and filling threads themselves should be able to increase the area of the filter and reduce drag. The fabric is long and elastic, can cover the hole and has a good degree; To promote the use of reverse air cleaning, the wool of the fabric is located on the side where dust and air come into contact. The lower the filtration rate, the easier it is to form a dust layer with small particle size and large porosity, and the more dust particles can be collected. When the wind speed is too high, the filtration rate is reduced by increasing the penetration of dust particles into the filtration material. Of course, penetration can also be overcome by choosing the right filtration material. In addition, when the filtration speed changes within the range, the dust removal rate of some filter media is almost not affected.

vacuum fume extractor supplier https://www.kaisenfilter.com/High-Vacuum-Fume-Extractor